1. ATV/Side-by-Side/UTV Parts & Accessories On Sale
  2. sku: 4432138589805611
  3. CYCLEATV 43294

CYCLEATV 43294 Rear Front Wheel Bearings Seals Cat

fits model: 300, 2x4. make: Arctic, Arctic-cat. year: 1998–2000.

43294 Cycleatv Front And Rear Wheel Bearings Seals For 1998 1999 2000 Arctic Cat 300 2x4

( Brand: Cycleatv ), ( Part Type: Bearing Seal Wheel ), ( Manufacturer Part Number: 43294 )

Review CYCLEATV Front And Rear Wheel Bearings Seals Arctic Cat fits 300 2X4 1998–2000

The CycleATV 43294 front and rear wheel bearings seals are specifically designed for Arctic Cat snowmobiles manufactured between 1998 and 2000 with a 300 model designation. These high-quality seals ensure a proper seal between the wheel hub and the outer wheel, preventing the intrusion of water, dirt, and debris that could potentially cause damage to the wheel bearings.

The front wheel bearing seal measures 1.375 inches in width and 2.375 inches in length, while the rear wheel bearing seal measures 1.5 inches in width and 2.75 inches in length. Both seals are made of a robust, flexible material that can withstand the harsh conditions of riding on snow and ice.

Installation of these seals is a crucial step in maintaining the performance and longevity of your Arctic Cat snowmobile. A worn or damaged seal can cause a variety of issues, including excessive play in the wheel, vibration, and excessive wear on the wheel bearings. Replacing the seals regularly is an essential part of routine maintenance.

To install the seals, first, remove the old seal and clean the hub and bearing area thoroughly. Apply a generous amount of grease to the new seal, and then press it into place. Be sure to install the new wheel bearing at the same time. Properly installed, these seals will provide a tight, effective seal, ensuring that your Arctic Cat snowmobile continues to perform at its best.

In summary, the CycleATV 43294 front and rear wheel bearings seals for 1998 to 2000 Arctic Cat 300 models are essential for maintaining the performance and longevity of your snowmobile. These high-quality seals provide a tight, effective seal against water, dirt, and debris, protecting the wheel bearings from damage. With proper installation, these seals will help ensure that your Arctic Cat snowmobile continues to perform at its best on the snow and ice.

Buying CycleATV 43294 front and rear wheel bearings seals for a 1998, 1999, or 2000 Arctic Cat 300 snowmobile comes with both advantages and disadvantages. Here are some key points to consider:

Advantages:

1. OEM Parts: These wheel bearings and seals are original equipment manufacturer (OEM) parts, which means they are specifically designed for your Arctic Cat 300 model. This ensures a proper fit and function.

2. Improved Performance: Worn-out wheel bearings and seals can lead to poor performance, such as wobbling or vibration. Replacing them with new ones can improve the overall performance of your snowmobile.

3. Longer Longevity: New bearings and seals can help prevent premature wear and tear on other components, such as the hubs and axles, which can save you money in the long run.

4. Enhanced Safety: Worn-out wheel bearings and seals can lead to wheel wobble, which can result in a loss of control and potential accidents. Replacing them can help ensure your safety on the snow.

Disadvantages:

1. Cost: Replacing both the front and rear wheel bearings and seals can be a significant investment. The cost of this kit may be higher than other aftermarket options.

2. Installation: Installing new wheel bearings and seals can be a time-consuming and labor-intensive process. It may require special tools and skills, and you may need to remove the wheels and hubs from your snowmobile.

3. Availability: Depending on your location and availability, it may take some time to source and receive the parts. You may need to order them online or from a dealer, which can add to the overall cost and wait time.

Conclusion:

While the cost and installation process may be a drawback, the advantages of using OEM CycleATV 43294 front and rear wheel bearings and seals for your 1998, 1999, or 2000 Arctic Cat 300 snowmobile far outweigh the disadvantages. The improved performance, longer longevity, and enhanced safety are all important factors to consider when making your purchase. Ultimately, investing in new OEM wheel bearings and seals can help ensure a smoother, safer, and more enjoyable riding experience.

Recommendation:

If you are experiencing wheel wobble, vibration, or poor performance on your Arctic Cat 300 snowmobile, it is recommended that you replace the front and rear wheel bearings and seals with new OEM parts such as CycleATV 43294. While the cost and installation process may be a consideration, the benefits of improved performance, longer longevity, and enhanced safety make it a worthwhile investment for your snowmobile.

specifications utvyank:

  • for models: 300, 2x4
  • for makes: Arctic, Arctic-cat
  • for years: 1998-2000
  • brand: Cycleatv
  • part type: Bearing Seal Wheel
  • manufacturer part number: 43294

shipping utvyank:

  • cost: $0.00
  • class: Expedited
  • type: Fixed
  • transit: 4-7 Days
  • service: FedEx 2Day
  • carrier: FedEx

payments utvyank:

  • other
  • wallet: Google-pay
  • credit card: Discover

general utvyank:

  • condition: New
  • Parts Accessories > ATV, Side-by-Side UTV Parts Accessories > Other ATV, Side-by-Side UTV Parts Accessories

offer utvyank:

  • started: March 6, 2025
  • availability: In Stock
  • sold: 0
  • options: Ship-to-home

returns utvyank:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

seller utvyank:

  • # reviews: 55991
  • rating: 99.2%
for models: 300, 2x4, for makes: arctic, arctic-cat, for years: 1998-2000, part type: bearing seal wheel,
category: atv parts > atv, side-by-side utv parts accessories, sku: 4432138589805611,

Cycleatv 43294 Is Similar To:

utvyank logo